The heatmiser PRT-E underfloor heating thermostat has been designed specifically with electric under floor heating in mind. It is compatible with all electic floor systems with a total load less than 16A 

The heatmiser PRT-E thermostat allows you to control the system in a variety of ways;
 
1. Floor sensor only.  Ideal when you only want to control the floor surface temperature. (Conservatories for example)
2. Air and Floor. The thermostat controls the air temperature whilst using the floor sensor to prevent overheating of the floor system. 
3. Remote Air and Floor.  Ideal for remote control of the air and floor temperature (Bathrooms for example) 

• 5/2 day or 7 day programming (selectable in software)
• Temperature Hold Feature
• Holiday Feature
• °C / °F selectable
• Self Learning Optimum Start on 1st and 3rd level 
• Keylock Facility
• Frost protection with adjustable temperature setting
• Remote Control Option (RM1)
• 16A Switch rating  (3,680 watts)
• Blue Backlight (turns off after 30 seconds)
• Floor sensor included
• Supply: 230v AC
• Dimensions: 98x85x13mm
• Weight: 195g

(Please note 13mm depth is after installation)

Probe Installation: We always suggest installing the probe into a conduit so that it can be retrieved if required. This conduit is not supplied with the thermostat.

System Type