Heatmiser TR2
The TR2 can be used to switch an appliance on and off over the phone, from anywhere. For example, you can use the TR2 to switch your boiler timeclock on and off - ideal for remote holiday homes .
For those looking for even more control, you can connect up to 32 heatmiser thermostats to the TR2.
You can then ...
Adjust the desired temperature in up to 32 rooms * Remotely switch on or off the heating in each room Remotely switch the hot water on or off Remotely control a single Auxiliary Device ( i.e Boiler, Lighting, etc) Read-back Request Feature Pass-code Protection Distinctive Ring Facility (*Heatmiser thermostat required in each room)
'Read-back Request Feature' This feature allows you to request status information from your TR2. The status information is read back to you ... for example 'The set temperature is now 22'
From every room with a heatmiser thermostat fitted, you can request...
The set temperature The actual room temperature The heat status The hot water status The Auxiliary Device status Distinctive Ring Facility The TR2 supports distinctive ring. This is marketed under a variety of names, but is primarily a function that offers additional telephone numbers on the same line.
CallSign, from BT for example, provides you with an additional telephone number on the same line. This number has a different ring pattern from your normal number and this pattern can be detected by the TR2 meaning that you can have an answering machine* on the same line as the TR2.
*Note: Your other telephone equipment must also support Distinctive Ring. If they don’t, you can purchase a BT product “BT TwinTalk” which will provide this function.
Important Network Compatibility Notice: This product is only compatible with version 3 products. If you are installing this on an existing system, please contact our technical department for assistance before ordering.
