Dimensions. – Height -1750mm , Diameter- 530mm

IF YOU WANT AN EASY AND COST EFFECTIVE WAY TO INTEGRATE AN OIL OR GAS BOILER, A wood burning stove OR BACK BOILER ETC. AND HAVE THE OPTION TO ADD solar panels AT ANY TIME THIS CYLINDER IS THE ANSWER TO YOUR PRAYERS.

Other Advantages.

• Integration of heating and hot water from a central location = large savings on plumbing and heating
• Supplied with high output solar coil and sensor pockets
• Easy connection of solar panels at any time- you will never need to change this cylinder to install solar panels
• Design maximises Solar gain and allows Solar contribution to heating and hot water
• Main boiler is activated by cylinder thermostat allowing maximum contribution of secondary heat sources
• Thermal mass water can be pressurised or open vented to allow connection of heating appliances without thermostats. When using a boiler without a thermostat as wood burning stove etc, the cylinder should be open vented and you should use a boiler suitable for an open vented system. With this system your hot water will still be at mains pressure.
• Supplies clean fresh hot water at more than three times the volume supplied by the best combi boiler
• Thermal store cylinders are exempt from unvented cylinder regulations
• Manufactured in England from best quality duplex stainless steel the cylinder has a manufacturers lifetime guarantee
• The cylinder is insulated to conform to current building regulations and finished with a plastic coated wipe clean metal finish

Typical Schematic Future Solar

Typical Schematic Solar Now

Technical Spec

Underfloor Heating

Solar Panels