An of the shelf warm water under floor heating kit suitable for extensions with floor areas from 40 sq.met to 50 sq. met . click for tube spacing table.
The Kit includes :-
* 250 met 16mm diameter form stable composite heating / hot water pipe . This pipe will have a very long lifespan when used with warm water floor heating. Click for tubing specification.
* One Reliance Thermomix underfloor heating manifold control pack. Click for specification
* 500 Push in pipe clips for clipping the UFH tubing to floor insulation
* One 3 port warm water underfloor heating manifold complete with fittings. Click for specification
* one 30 met roll of 8mm x130mm edge insulation
* one installation manual with help line number.
Delivery priced separately ,cost depends on area , see checkout or contact us.
The floor heating tubing should be cut using pipe cutters and re-rounded using a plastic reamer if you don’t already have these items they can be purchased from our tools section.
This is primarily a single zone warm water underfloor heating kit which can be used as a bolt on to your existing wet heating system and can therefore use the same heat source as the existing heating system which gives it a distinct advantage over electric underfloor heating packs.
The kit can be converted to a multi zone underfloor heating system if required , for information on how to do this and for advice on the correct thermostat to use please click here
